Please read our message regarding changes regarding tariff impacts.

or
Home | Japanese Kitchen Knives | Hitohira 150mm Butchering Knife SK Carbon Steel Wood Handle (No Bolste

Hitohira 150mm Butchering Knife SK Carbon Steel Wood Handle (No Bolster)

€51,11
€51,11
Sold Out

Shipping calculated at checkout.
READ IMPORTANT DELIVERY OPTION INFORMATION

Thin SK mono-steel blades cut very nicely with their thin profile and are super easy to sharpen and get a nice edge that holds well. They are ideal for the professional or home cook who is looking for a great workhorse with easy sharpen-ability.

Sometimes among comparisons of Japanese carbon steels SK family steels are viewed as inferior to more refined shirogami or aogami however when making single steel knives SK has its advantages. SK steel rusts slower than many other carbon steels like aogami or shirogami and has a good toughness which benefits a thin mono steel knife.

This is a non-stainless carbon steel, it should be mentioned that extra care is required, it should be washed and dried immediately after use. It will develop a dark patina with usage, but any orange rust should be removed with a light abrasive.



About This Knife

Butchery Knife

Built for tough butchery work.

Light Butchery OK

Safe for use around bones.

Iron Clad Carbon

Reactive core steel between two reactive layers.

Convex Grind

Super smooth cutting feel.

60/40

Slight right-hand bias.

Bullnose

A bullnose butcher’s knife features a long, slightly curved blade with a rounded tip, designed for efficient trimming and slicing of large cuts of meat. The curved edge allows smooth, continuous strokes, while the bullnose tip offers control and safety when working close to surfaces. Its weight and length make it effective for breaking down primals, portioning steaks, and general butchery where long, clean cuts are needed.

Listed Length: 150mm
Total Length:
Edge Length:
Heel Height:
Spine Thickness:
Weight:
Orientation: Right-hand Bias

Blade Type: Carbon Steel
Steel Type: SK4 Carbon Steel (JIS SK4)
Steel Hardness (HRC): undisclosed
Maintenance: More Attention
Handle Type: Japanese (wa)
Handle Material: Wood

  • This is a carbon steel knife made from thin, hard steel.
  • Hand wash and towel dry after use. Do not air dry or place in the dishwasher.
  • Expect oxidation (color change, staining, spotting) with use.
  • Prolonged exposure to moisture or food debris will cause rust; remove any rust with a light abrasive.
  • Remove surface rust gently with a mild abrasive and progress to more aggressive abrasives if needed. Coarse abrasives will leave scratches in most finishes.
  • Avoid twisting, scraping, or use on dense or hard foods and surfaces to avoid early dulling and edge damage. If you wouldn't bite into it, don't cut it with this knife.
  • Use on wooden cutting boards only. Do not use bamboo, plastic, stone or metal cutting surfaces.

Dive Deeper

Medium-fine finish

We recommend sharpening by hand using whetstones starting around 1000 grit progressing to at least 4000 for this steel type and edge geometry. Finish with a monodiachrome strop for a smooth cut with a substantial bite. Finer finishes are possible, but the knife may slide on smooth foods and overall edge retention may suffer. During repair, use a super coarse stone to pass chips quickly to help keep flat bevels.

  • Avoid pull-through sharpeners and non-water-cooled mechanized systems.
  • Strops and ceramic honing rods are preferred for as-needed edge maintenance. If you have to use a honing rod to be able to use the knife comfortably, it's time to sharpen the knife.

Sharpening Supplies

Stones & Accessories selected specifically for this knife.

Arato-kun #220 Extra Coarse Grit Whetstone

Arato-kun #220 Extra Coarse Grit Whetstone

€29,96
€29,96
Bernal Cutlery Takarazukushi 1200 Grit Blue Marble Semi-Soft Ceramic Japanese Whetstone

Bernal Cutlery Takarazukushi 1200 Grit Blue Marble Semi-Soft Ceramic Japanese Whetstone

€65,20
€65,20
Bernal Cutlery Takarazukushi 4000 Grit Yellow Semi-Hard Resinoid Japanese Whetstone

Bernal Cutlery Takarazukushi 4000 Grit Yellow Semi-Hard Resinoid Japanese Whetstone

€72,25
€72,25
Arashiyama #6000 Whetstone Stone NO Wooden Base

Arashiyama #6000 Whetstone Stone NO Wooden Base

€51,11
€51,11
Arashiyama #6000 Whetstone With Nagura Stone and Wooden Base

Arashiyama #6000 Whetstone With Nagura Stone and Wooden Base

€54,63
€54,63
Bernal Cutlery Monodiachrome™ Precharged Deburring Strop

Bernal Cutlery Monodiachrome™ Precharged Deburring Strop

€35,25
€35,25



SK4 Carbon Steel (JIS SK4)

Carbon (C): 0.9%| Manganese (Mn): 0.5%| Silicon (Si): 0.25%| Phosphorus/Sulfur: trace

A simple Japanese carbon steel (~0.9% C) similar to 1095, SK4 offers good hardness and sharpness with basic heat treatment. Typically hardened around 60 HRC, it’s affordable and tough, often used for utility and entry-level blades. Fully reactive, it patinas quickly but sharpens easily.



About Hitohira

Tokyo, Japan

Hitohira is a Tokyo-based company that has strong partnerships with a wide network of Japanese blacksmiths, sharpeners, and handle makers to offer thoughtfully curated kitchen knives. Rather than producing in-house, they focus on sourcing and quality control, working closely with both renowned and lesser-known craftspeople to bring exceptional tools to cooks and collectors worldwide.

See All Hitohira