or
Home | Western Kitchen Knives | Unmarked Custom Handled 8.5" Chef Knife Carbon Steel

Unmarked Custom Handled 8.5" Chef Knife Carbon Steel

£111.14
£111.14
Sold Out

Shipping calculated at checkout.
READ IMPORTANT DELIVERY OPTION INFORMATION

American (?) carbon steel chef knife with a custom-made handle done in tropical hardwoods and brass, the woodwork is nice and has a pleasing patina. The blade looks to be from around the 1930s to 60s, and the handle was done afterward but appears to have been done some time ago, 1980s? 90s? 



About This Knife

Avoid Bones & Dense Foods

If you can't bite it, don't cut it.

Carbon Steel

Reactive blade.

Chef's Knife

A chef’s knife is an all-purpose kitchen knife designed for chopping, slicing, and dicing a wide range of ingredients. Its curved edge supports rocking cuts, while the pointed tip handles detail work. It’s the core knife in most kitchens for general prep.

Listed Length:
Total Length:
Edge Length: 8 1/2"
Heel Height: 1 7/8"
Spine Thickness:
Weight:
Orientation: Ambidextrous

Blade Type:
Steel Type: Vintage Carbon
Steel Hardness (HRC):
Reactive: More Attention
Handle Type:
Handle Material:

  • This is a reactive carbon steel knife.
  • Hand wash and towel dry after use. Do not air dry or place in the dishwasher.
  • Expect oxidation (color change, staining, spotting) with use.
  • Prolonged exposure to moisture or food debris will cause rust; remove any rust with a light abrasive.
  • Use only on a quality wooden cutting board.
  • Do not use on hard surfaces like bamboo or plates.
  • Don't twist or scrape the edge on the cutting surface to avoid early dulling and edge damage.

Dive Deeper

Medium - Western Carbon

We recommend hand sharpening on whetstones to a low-medium finish starting around 400 and progressing to around 1000 grit with a monodiachrome strop finish. Gentle use with steel honing rods work well for as-needed edge maintenance. Avoid pull-through sharpeners and non-water-cooled mechanized sharpening. If you have to use a honing rod to be able to use the knife comfortably, it's time to sharpen the knife.

Sharpening Supplies

Stones & Accessories selected specifically for this knife.

Sample product 1
9.99
Sample product 2
9.99
Sample product 3
9.99
Sample product 4
9.99
Sample product 5
9.99
Sample product 6
9.99
Sample product 7
9.99
Sample product 8
9.99
Sample product 9
9.99
Sample product 10
9.99
Sample product 11
9.99
Sample product 12
9.99
Sample product 13
9.99
Sample product 14
9.99



Vintage Carbon

Carbon steel was the standard for working knives well into the 20th century but it's difficult to know which particular alloys were used on each knife. It sharpens easily, takes a fine edge, and responds directly to the hand that uses it. Its composition varied by maker and region, often undocumented, but its performance was consistent and trusted. Patina and maintenance were part of its nature, accepted as the cost of superior cutting feel.