Order by Monday 12/16 to be sure to get your orders on time.

or
Home | Western Kitchen Knives | A Stock New Vintage 30cm / 11.75" Ideal Chef Carbon POM Thiers, France

A Stock New Vintage 30cm / 11.75" Ideal Chef Carbon POM Thiers, France 1970-90

$350.87
$350.87
$0.00
Sold Out

Shipping calculated at checkout.

New old stock unmarked 30cm / 11.75" carbon steel chef knives from the vintage vault!  These knives are unmarked, so dating is a little difficult, but they were most likely made in the the 1960's to 90's.

They were hand forged after being drop forged and hand ground on water stones in the old Thiers style.  This lends to giving them a great geometry, making them nimble where they need to be and tough in the heel. These are the quintessential post war French chef knife. 

A Stock are the best quality among the knives from this stock, we accepted small imperfections in the blade straightness which for the age is typical but rejected bends or waviness that would impede sharpening or use. 

Please note these can have small rust spots or imperfections, slight cants or waviness to the edge is possible as well. We do quality control on these but imperfections are part of the picture.

New Old Stock, Vintage and New Vintage knives do not come sharpened. Please request sharpening if desired in the order notes section of the cart page. 

Brand: Unmarked
Producing Area: Thiers, France
Profile: Chef
Size: 30cm / 11.75"
Steel Type: Carbon
Handle: POM
Total Length: 43cm / 17"
Edge Length: 305mm / 12"
Handle to Tip Length: 30cm / 11.75"
Blade Height:  60mm / 2.25"
Thickness: 5.45mm / 0.215"
Handle Length: 130mm / 5.25"
Weight: 374g / 13.2oz
Hand Orientation: Ambidextrous

This is a carbon steel knife. Carbon steel is expected to develop a dark patina with use. It needs to be hand washed and towel dried soon after use. Do not air dry. Do not put it in the dishwasher. Long exposure to moisture and debris will result in rust. Any rust development should be removed with a light abrasive.

Use on a quality wooden cutting board will help the knife stay sharper for longer. Use on hard surfaces like plates and bamboo will reduce the edge life and can result in edge damage.

We recommend hand sharpening on whetstones. We have found that most western knives perform best with a medium finish starting around 1000 grit. Avoid pull through sharpeners and non-water cooled mechanized sharpening. Steel honing rods work well with this knife.

READ IMPORTANT DELIVERY OPTION INFORMATION

A Stock New Vintage 30cm...

$350.87
$350.87
$0.00
Sold Out