or
Home | Western Kitchen Knives | Carl Schleipper Remscheid 11" Bullnose Carbon Steel 19th or early 20th

Carl Schleipper Remscheid 11" Bullnose Carbon Steel 19th or early 20th C

€180,31
€180,31
Sold Out

Shipping calculated at checkout.

Carl Schleipper 11" bullnose knife made in Remscheid, a town adjourning Solingen in the industrial Ruhr region with carbon steel blade, and large brass disc pin and disc rivets over a rosewood handle. 

This one is tricky to date, the lack of 'Germany' suggests pre-1891 manufacture however if it was not meant for export to the United States it could be later. Schleipper did make items for export to South East Asia and the rough grinding on this does suggest it was made to be inexpensive. It is a roll forge type blade with the spine thicker than the edge a bit also suggesting it was not an expensive knife in it's day. 

Blade had seen some rust leaving some light pits and pepperspots, handle is nice and secure and the blade is still very full not having been oversharpened. 

11.25" edge, 16.25" overall 10.7 oz 

This is a carbon steel knife. Carbon steel is expected to develop a dark patina with use. It needs to be hand washed and towel dried soon after use. Do not air dry. Do not put it in the dishwasher. Long exposure to moisture and debris will result in rust. Any rust development should be removed with a light abrasive.

Use on a quality wooden cutting board will help the knife stay sharper for longer. Use on hard surfaces like plates and bamboo will reduce the edge life and can result in edge damage.

We recommend hand sharpening on whetstones. We have found that most western knives perform best with a medium finish starting around 1000 grit. Avoid pull through sharpeners and non-water cooled mechanized sharpening. Steel honing rods work well with this knife.

READ IMPORTANT DELIVERY OPTION INFORMATION