🧥 Large & In Charge - FLASH SALE! 🧥

240mm, 270mm, 300mm Gyutos 15% OFF! Check out the DEALS tab for collections.

Home | Nigara Hamono | Nigara Hamono 300mm Sakimaru Yanagi Aogami 2 Honyaki Karin Burl Double

Nigara Hamono 300mm Sakimaru Yanagi Aogami 2 Honyaki Karin Burl Double Horn Handle

$3,855.85
$3,855.85
Sold Out

Shipping calculated at checkout.

Hand made in Aomori prefecture, mizu  honyaki (water quenched) Aogami #2  yanagi with karin wood handle with buffalo horn spacers.

Nigara Hamono in Hirosaki City in Aomori Prefecture is a 350 year old metalworking company with swordmaking roots. Blacksmith Go Yoshizawa has expanded Nigara's range to include kitchen knives including the very demanding honyaki forging and differential heat treatment.  

Honyaki heat treatment relies on a single steel blade as opposed to a clad steel / mild steel or iron construction. Water quench honyaki makes for the hardest possible edge but due to the rapid heat loss during the quenching has a high failure rate even for experienced smiths. This knife has been etched to bring out an additional contrast at the hamon, the result is a very lively and vibrant pattern pulled from the steel. 

Aogami is rated at 2, 1 & Super increasing in carbon and alloy content as the number gets smaller, typically aogami 2 is tough with a shorter edge life than aogami 1 and aogami super has the best edge life with potentially the least toughness all though this is a generalization and greatly depends on the way the steel is forged. Honyaki aogami 2 will have longer edge life than a mass produced aogami super so this is a general view. When heat treated using the honyaki technique the result is a steel that cuts very well as it slowly dulls and works very well at very fine finishes. This is definitely a sharpener's steel, great for a huge variety of finishing stones, especially many natural stones. 

Not for the first time user of a yanagi, this knife will demand greater skill in sharpening and use to preserve the proper geometry and to avoid damage, in addition the etched surface will be removed with sharpening. 

Brand: Nigara Hamono
Producing Area:   Hirosaki City
Profile: Yanagi
Size: 300mm
Steel Type: Mizu Honyaki (water quenched)Aogami #2
Handle: Karin burl wood with double buffalo horn & 3 nickel spacers
Total Length: 461mm
Edge Length: 302mm
Handle to Tip Length: 304mm
Blade Height: 40mm
Thickness: 4.6mm
Handle Length: 159mm
Weight: 291g
Hand Orientation: Right Handed 

This is a carbon steel knife. Carbon steel is expected to develop a dark patina with use. It needs to be hand washed and dried immediately after use. Do not air dry. Do not put it in the dishwasher. Long exposure to moisture and debris will result in rust. Any rust development should be removed with a light abrasive.

Twisting, scraping, and heavy use, as well as use on hard and very dense objects can lead to edge damage. Use on a quality wooden cutting board will help the knife stay sharper for longer. Use on hard surfaces like plates and bamboo will reduce the edge life and can result in edge damage. Special attention needs to be taken to prevent edge damage. Scraping, twisting and forceful as well as using on hard or very dense foods can result in chipping.

We recommend hand sharpening on whetstones. We have found that most Japanese knives perform best at a finer finish starting around 4000. Avoid pull through sharpeners and non-water cooled mechanized sharpening. Ceramic honing rods are preferred.

How Shipping Works

Nigara Hamono 300mm Sakimaru Yanagi...

$3,855.85
$3,855.85
Sold Out
>