or
Home | Kitchen Knives | Hitohira Togashi 165mm Deba Aogami 2 Ho Wood with Saya

Hitohira Togashi 165mm Deba Aogami 2 Ho Wood with Saya

$314.00
$314.00
Sold Out

Shipping calculated at checkout.
READ IMPORTANT DELIVERY OPTION INFORMATION

Hand made in Sakai, iron clad Aogami 2 forged by dentoukougeishi master smith Kenji Togashi and expertly ground by his son Kenya. .

These are ground with a fine flat kireba, for users that are somewhat newer to using a deba (under 5 years experience) adding some curvature to the main bevel will help to strengthen it.

 

Fish Butchery

Designed specifically for fish breakdown.

Light Butchery OK

Safe for use around bones.

Carbon Steel

Reactive blade.

Single Bevel

Wide bevel on outside face—hollow grind on inside face.

Right-Handed

Made for use in the right hand.

Deba

A deba is a traditional Japanese single-bevel knife designed for processing fish. Its thick, heavy blade provides the strength needed to break down whole fish, remove heads, and make clean cuts through bones without chipping. The fine, razor-sharp edge near the tip allows precise filleting and skin removal. While primarily used for fish, the robust heel can also handle light poultry work. The deba’s weight and geometry give it controlled, confident cutting in tasks that require both power and accuracy.

Listed Length: 165mm
Total Length: 310mm
Edge Length: 168mm
Heel Height: 50mm
Spine Thickness: 6.2mm
Weight:
Orientation: Right-handed

Blade Type: Carbon Steel
Steel Type: Aogami 2 (Blue Paper #2)
Steel Hardness (HRC):
Maintenance: More Attention
Handle Type: Japanese (wa)
Handle Material: Ho (Magnolia) & Horn Ferrule

  • This is a carbon steel knife made from hard steel.
  • Carbon steel knives develop a dark patina and require attentive care.
  • Hand wash and dry immediately after use. Do not air dry or clean in the dishwasher.
  • Rust will form with long-exposure to moisture or debris. Remove surface rust gently with a mild abrasive and progress to more aggressive abrasives if needed. Coarse abrasives will leave scratches in most finishes.
  • New deba edges are thin. Avoid excessive twisting to avoid edge damage.
  • Do not use bamboo, plastic, stone or metal cutting surfaces.

Dive Deeper

Medium-fine Single Bevel

Sharpening Supplies

Stones & Accessories selected specifically for this knife.

Arato-kun #220 Extra Coarse Grit Whetstone

Arato-kun #220 Extra Coarse Grit Whetstone

$34.00
$34.00
Bernal Cutlery Takarazukushi 1200 Grit Blue Marble Semi-Soft Ceramic Japanese Whetstone

Bernal Cutlery Takarazukushi 1200 Grit Blue Marble Semi-Soft Ceramic Japanese Whetstone

$74.00
$74.00
Bernal Cutlery Takarazukushi 4000 Grit Yellow Semi-Hard Resinoid Japanese Whetstone

Bernal Cutlery Takarazukushi 4000 Grit Yellow Semi-Hard Resinoid Japanese Whetstone

$82.00
$82.00
Arashiyama #6000 Whetstone Stone NO Wooden Base

Arashiyama #6000 Whetstone Stone NO Wooden Base

$58.00
$58.00
Arashiyama #6000 Whetstone With Nagura Stone and Wooden Base

Arashiyama #6000 Whetstone With Nagura Stone and Wooden Base

$62.00
$62.00
Bernal Cutlery Monodiachrome™ Precharged Deburring Strop

Bernal Cutlery Monodiachrome™ Precharged Deburring Strop

$40.00
$40.00

Aogami 2 (Blue Paper #2)

Carbon (C): 1.1–1.2% | Tungsten (W): 1.1–1.5% | Chromium (Cr): 0.3%

Aogami 2 is a well-balanced Hitachi carbon steel commonly hardened to around 60–63 HRC—about one point softer than Aogami 1—which gives it excellent edge retention with added toughness. Its slightly lower carbon content means it loses its razor edge a bit sooner but holds a strong working edge for long periods, making it a favorite “sweet spot” steel for daily-use kitchen knives. More forgiving and less brittle than Aogami 1, it can take thin edges without chipping and excels in hard-use kitchen or woodworking applications.

Though fully reactive and prone to patina, it sharpens easily to a keen, refined edge and responds beautifully to both fine and toothy finishes. Aogami 2 is widely used by Japanese makers for workhorse knives and is often stainless-clad for user-friendly maintenance.

About Kenji Togashi

Sakai, Osaka, Japan

Kenji Togashi is a blacksmith from Sakai with over 55 years of experience. Starting his craft in 1967, Togashi became a certified Dentoukougeishi (Traditional Craftsman) in 1996 and was later honored as a Master of Traditional Crafts for his expert quenching technique. He is especially revered for forging impeccable honyaki knives – single-steel blades considered the pinnacle of forging skill. Togashi’s outstanding work earned him the Order of the Sacred Treasure. Working alongside his sons in a multi-generational forge, Togashi continues to uphold Sakai’s knife-making heritage, producing masterpieces treasured by chefs and collectors.

See All Kenji Togashi