Western stainless knives are softer and lower in carbon than Japanese stainless knives, they are typically tougher but dull a bit faster. They have a wider range but sacrifice edge life and working well at fine finishes. Western stainless knives benefit from being left more toothy.
For western stainless knives, we recommend a coarser finish from medium stones, around 1000 grit, then deburred with borachrome on a strop for a more durable, bitey feel. Jinko Aoto (2000-4000) and Naniwa 2000 can also be used if a keener edge is desired, however it might feel slidey sooner than a 1000 grit finish.
Remember that sometimes a coarse stone is necessary to re-set more heavily dulled (or rounded from a steel) edges. If you have a rounded edge, or it takes more than 5 minutes to get a burr with a medium stone, then a coarser stone is in order.
Keep in mind western stainless steel knives benefit from periodic edge maintenance with a sharpening steel. Feel the edge in an outward motion (pushing across the edge off of the knife face) to feel for a slight bend on the edge; one side will feel smooth and the other a little rough, this is the time to use a steel. Stones are essential to preserve ideal geometry in tandem with regular steeling.
Diamond stone flatteners are best to quickly level out the widest range of stone grits. Some flatteners can leave behind large particulates on medium and finer stones that can leave deep, unexpected scratches. Use your fingers to feel for any malignant grit that needs to be cleaned off.
Rubberized Cork Strop 13x3x5/16”
- Regular Price
- $28.00
- Sale Price
- $28.00
- Regular Price
-
- Unit Price
- per
Arashiyama #1000 Whetstone Medium Hard with Natural Grit
- Regular Price
- $42.00
- Sale Price
- $42.00
- Regular Price
-
- Unit Price
- per
Bernal Cutlery Takarazukushi 400 Grit Yellow Marble Hard Ceramic Japanese Whetstone
- Regular Price
- $52.00
- Sale Price
- $52.00
- Regular Price
-
- Unit Price
- per
Bernal Cutlery Takarazukushi 1200 Grit Blue Marble Semi-Soft Ceramic Japanese Whetstone
- Regular Price
- $74.00
- Sale Price
- $74.00
- Regular Price
-
- Unit Price
- per
Jinzou Aoto (Man-Made) #2000-4000 Medium-Fine Whetstone with Natural Grit
- Regular Price
- $58.00
- Sale Price
- $58.00
- Regular Price
-
- Unit Price
- per
Atoma #140 Diamond Stone With Handle
- Regular Price
- $130.00
- Sale Price
- $130.00
- Regular Price
-
- Unit Price
- per
Atoma #140 Diamond Stone with Holder
- Regular Price
- $128.00
- Sale Price
- $128.00
- Regular Price
-
- Unit Price
- per
Arato-kun #220 Extra Coarse Grit Whetstone
- Regular Price
- $34.00
- Sale Price
- $34.00
- Regular Price
-
- Unit Price
- per
Friedr Herder 10” x 3/8” Round Honing Steel Wood Handle
- Regular Price
- $49.00
- Sale Price
- $49.00
- Regular Price
-
- Unit Price
- per
F. Dick Balkan 10" Flat Honing Steel - Fine Cut
- Regular Price
- $88.00
- Sale Price
- $88.00
- Regular Price
-
- Unit Price
- per
Atoma #140 Diamond Stone No Holder
- Regular Price
- $105.00
- Sale Price
- $105.00
- Regular Price
-
- Unit Price
- per
Friedr Herder 12” x 3/4” Oval Honing Steel Wooden Handle
- Regular Price
- $89.00
- Sale Price
- $89.00
- Regular Price
-
- Unit Price
- per
Friedr Herder 12” x 3/8” Round Honing Steel Wood Handle
- Regular Price
- $55.00
- Sale Price
- $55.00
- Regular Price
-
- Unit Price
- per
Friedr Herder 14” Oval Honing Steel
- Regular Price
- $99.00
- Sale Price
- $99.00
- Regular Price
-
- Unit Price
- per