Hitohira Togashi 240mm Sujihiki Stainless Clad Shirogami 1 Ziricote Handle

Prix ordinaire
$716.46
Prix soldé
$716.46
Prix ordinaire
Épuisé
Prix unitaire
par

Frais d'expédition calculés lors du paiement.

Hand made in Sakai, stainless clad shirogami 1 forged by dentoukougeishi master smith Kenji Togashi and expertly ground by his son. Stainless clad shirogami 1 is a less common combination as it is more challenging to work but it offers a great combination of the shirogami 1 carbon steel's fine edge formation and long edge life with the stainless steel's ease of use.

These are super easy to sharpen with a great cutting duration and smooth cutting feel with nicely finished corners.

 

Brand: Hitohira ひとひら (一片)
Smith: Togashi Blacksmith 富樫打刃物製作所
Producing Area: Sakai-Osaka/ Japan
Profile: Sujihiki
Size: 240mm
Steel Type: Carbon Steel
Steel: Yasuki White (Shirogami) #1, Soft Stainless Clad
Handle: Ziricote & Buffalo Horn Ferrule Octagonal
Total Length: 398mm
Edge Length: 232mm
Handle to Tip Length: 246mm
Blade Height: 38mm
Thickness: 2.4mm
Handle Length: 146mm
Weight: 164g
Hand Orientation: Ambidextrous
Sharpener: Kenya Togashi

This is a carbon steel knife. Carbon steel is expected to develop a dark patina with use. It needs to be hand washed and towel dried soon after use. Do not air dry. Do not put it in the dishwasher. Long exposure to moisture and debris will result in rust. Any rust development should be removed with a light abrasive.

Twisting, scraping and heavy use as well as use on hard and very dense objects can lead to edge damage. Use on a quality wooden cutting board will help the knife stay sharper for longer. Use on hard surfaces like plates and bamboo will reduce the edge life and can result in edge damage. Special attention needs to be taken to prevent edge damage. Scraping, twisting and forceful as well as using on hard or very dense foods can result in chipping.

We recommend hand sharpening on whetstones. We have found that most Japanese knives perform best at a finer finish starting around 4000. Avoid pull through sharpeners and non-water cooled mechanized sharpening. Ceramic honing rods are preferred.